Figure 37: Ucm6510 Fxo Tone Settings; Figure 38: Ucm6510 Pstn Detection - Grandstream Networks UCM6510 IP PBX User Manual

4. Click on "Detect" to start PSTN detection.

If there are two FXO ports connected to PSTN lines, use the following settings for auto-detection.
Detect Model: Auto Detect.
Source Channel: The source channel to be detected.
Destination Channel: The channel to help detecting. For example, the second FXO port.
Destination Number: The number to be dialed for detecting. This number must be the actual
PSTN number for the FXO port used as the destination channel.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 37: UCM6510 FXO Tone Settings

Figure 38: UCM6510 PSTN Detection

UCM6510 IP PBX User Manual Page 86 of 229