Figure 26: Ucm6510 Zero Config - Grandstream Networks UCM6510 IP PBX User Manual


SIP SUBSCRIBE
When the phone boots up, it sends out SUBSCRIBE to a multicast IP address in the LAN. The
UCM6510 discovers it and then sends a NOTIFY with the XML config file URL in the message body.
The phone will then use the path to download the config file generated in the UCM6510 and reboot
again to take the new configuration.

DHCP OPTION 66
This method should be used only when the UCM6510 is set to "Route" mode under web GUI-
>Settings->Network Settings->Basic Settings: Method. When the phone restarts (by default DHCP
Option 66 is turned on), it will send out a DHCP DISCOVER request. The UCM6510 receives it and
returns DHCP OFFER with the config server path URL in the Option 66, for example,
https://192.168.2.1:8089/zccgi/. The phone will then use the path to download the config file
generated in the UCM6510.

mDNS
When the phone boots up, it sends out mDNS query to get the TFTP server address. The UCM6510
will respond with its own address. The phone will then send TFTP request to download the XML
config file from the UCM6510.
To start the auto provisioning process, under web GUI->PBX->Basic/Call Routes->Zero Config, click on
"Auto Provision Settings" and fill in the auto provision information.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Figure 26: UCM6510 Zero Config

UCM6510 IP PBX User Manual Page 58 of 229