Brake Pads Not Lying Against The Brake Disc - BMW F 750 GS Rider's Manual

208 MAINTENANCE
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Position left and right brake
calipers on the brake discs.
Tighten mounting bolts 4 of
the left and right brake cal-
ipers to the specified torque.
Brake caliper to tele-
scopic fork
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to
delayed braking effect.
Before driving, check that
the brakes respond without
delay.
Operate the brake several
times until the brake pads are
bedded.
Seat the cable for the wheel-
speed sensor in holding
clips 2 and 3.
Insert the wheel speed sensor
into the bore and tighten
screw 1 to the specified
torque.
Wheel-speed sensor,
front, to fork leg
Thread-locking compound:
micro-encapsulated
8 Nm