Mercedes-Benz G-Class Operator's Manual page 98

Memory functions
96
WARNING
G
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
Make sure that the SmartKey is in position
X
2 ( page 133) or that the respective door
Y
is open.
Adjust the seat (
X
Y
restraint ( page 86).
Y
On the driver's side, adjust the steering
X
wheel ( page 91) and the exterior mirrors
Y
( page 93).
Y
Press the M memory button.
X
Press one of memory buttons 1, 2 or 3
X
within three seconds.
The settings are stored in the selected stor-
age position.
Calling up a stored setting
! If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest using the seat
switch. The seat could otherwise be dam-
aged.
Press and hold the relevant memory button
X
1, 2 or 3, until the seat, head restraints,
steering wheel and mirrors are in the stored
position.
i
The setting procedure is interrupted as
soon as you release the memory button.
page 86) and head