Mercedes-Benz G-Class Operator's Manual page 80

Side windows
78
Front left
:
Front right
;
Rear right
=
Rear left
?
Turn the SmartKey to position 1 or 2 in the
X
ignition.
To open: press the corresponding switch.
X
To close: pull the corresponding switch.
X
To open automatically: press the corre-
X
sponding switch briefly beyond the point of
resistance.
The side window opens completely.
To interrupt automatic operation: press
X
or pull the corresponding switch again.
i
You can continue to operate the side win-
dows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.
i
The side windows cannot be operated
from the rear when the override feature for
the side windows is activated (
Convenience opening
i The convenience opening feature can
only be operated using the SmartKey. The
SmartKey must be close to the driver's
door handle.
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions simultane-
ously:
unlock the vehicle
R
open the side windows
R
open the sliding sunroof
R
switch on the seat ventilation for the driv-
R
er's seat and front-passenger seat
Point the tip of the SmartKey at the driver's
X
door handle.
Press and hold the % button until the
X
side windows and the sliding sunroof are in
the desired position.
To interrupt convenience opening:
X
release the % button.
Problems with the side windows
G WARNING
Closing the side windows with increased force
or without the anti-entrapment feature could
lead to serious or even fatal injury. Make sure
that nobody can become trapped when clos-
ing the side windows.
Problem: a side window cannot be closed
because objects are trapped between the
side window and the door frame.
Remove the objects.
X
Close the side window.
X
Problem: a side window cannot be closed
page 60).
Y
and you cannot see the cause.
If a side window is obstructed during closing
and reopens again slightly:
Immediately after the window blocks, pull
X
the corresponding switch again until the
side window has closed.