Mercedes-Benz G-Class Operator's Manual page 90

Seats
88
Adjusting the rear seat head restraint
height
Once the head restraint is fully lowered,
X
press release catch :.
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : and push
X
the head restraint down until it is in the
desired position.
Installing/removing the rear seat head
restraints
To remove: pull the head restraint up to
X
the stop.
Press release catch : and pull the head
X
restraint out of the guides.
To re-install: place the head restraint in
X
the guides of the backrest.
i
The notches on the guide rod must be on
the left-hand side when viewed in the direc-
tion of travel.
Push the head restraint down until you hear
X
it engage in position.
Adjusting the multicontour seat
To adjust the thigh cushion
:
To adjust the backrest contour in the lum-
;
bar region
To adjust the backrest contour in the
=
upper back region
To adjust the side bolsters of the seat
?
backrest
You can adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
Make sure that the SmartKey is in position
X
1 or 2 ( page 133) in the ignition lock.
Y
Adjusting the 4-way lumbar support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?