Service Host Rule Add - THOMSON SpeedTouch 585 Reference Manual

service host rule add

Create/define a host service portmap.
SYNTAX:
service host rule add
where:
name The name of the host service.
protocol The IP protocol type.
Choose between:
any
tcp
udp
a number.
baseport The inbound base port.
Select one of the supported TCP/UDP port names (see
Port Names" on page
Note
portrange The outbound port range.
triggerport The outbound trigger port.
Select one of the supported TCP/UDP port names (see
Port Names" on page
triggerprotocol Protocol of the trigger port.
Choose between:
any
tcp
udp
a number.
Note
RELATED COMMANDS:
service host rule delete
E-DOC-CTC-20050531-0058 v1.0
name = <quoted string>
[protocol = <{any|tcp|udp} or number>]
[baseport = <supported UDP port | number>]
portrange = <port-range>
[triggerport = <supported UDP port | number>]
[triggerprotocol = <{any|tcp|udp} or number>]
639) or, alternatively, specify the port number.
If not specified, baseport
639) or, alternatively, specify the port number.
If not specified, triggerprotocol
Delete a host service portmap.
" Supported TCP/UDP
is equal to the first port of portrange.
" Supported TCP/UDP
is equal to protocol.
Service Commands
REQUIRED
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
529