Wireless Commands
wireless secmode wep
Configure the WEP settings.
If the current security mode is WEP, then the security mode must first be changed, before the WEP
settings can be (re)configured.
SYNTAX:
wireless secmode wep
where:
encryptionkey
EXAMPLE:
=>wireless secmode wep
Security level WEP:
encryption key
enabled
=>
618
[encryptionkey = <quoted string>]
The secret key to be used for WEP encryption.
Two key lengths (64 or 128 bits) and two formats (alphanumeric or hexadecimal)
are permitted:
for 64-bit encryption:
the key must consist of 10 hexadecimal digits or 5 alphanumeric characters
for 128-bit encryption:
the key must consist of 26 hexadecimal digits or 13 alphanumeric
characters.
Note
If no encryptionkey is filled in, then the default encryptionkey is used.
: FFA22E9CCA
: yes
OPTIONAL
E-DOC-CTC-20050531-0058 v1.0