3. Remove the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle" on
page 112.
4. Remove the optical drive bracket. See "Removing and reinstalling the optical drive bracket" on page 124.
5. Locate the internal speaker. See "Locating major FRUs and CRUs" on page 32.
6. Disconnect the internal speaker cable from the system board. See "Locating parts on the system
board" on page 34.
7. Remove the system board. See "Replacing the system board" on page 178.
8. Use a screw driver to slightly lever up the internal speaker. Then, remove the internal speaker from
the retaining tabs.
Figure 126. Removing the internal speaker
9. Insert the new internal speaker as shown until it is secured by the retaining tabs.
Figure 127. Installing the internal speaker
182
ThinkStation P500 and P700 Hardware Maintenance Manual