Figure 45. Installing the storage drive into the type
6. Slide the bracket with the new storage drive into the storage drive bay.
Figure 46. Installing the type
7. Connect the signal cable and the power cable to the new storage drive, and then close the handles
on both sides of the bracket.
To install or replace a 3.5-inch storage drive in a type
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
132
ThinkStation P500 and P700 Hardware Maintenance Manual
1
bracket
1
storage drive bracket
2
bracket, do the following: