2. Remove the computer cover. See "Removing the computer cover" on page 111.
3. Locate the storage drive bay. See "Locating internal drives" on page 38.
1. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 47. Removing the type
2. If you are replacing a storage drive, flex the sides of the bracket to remove the storage drive from
the bracket.
Figure 48. Removing the storage drive from the type
1. Flex the sides of the bracket and align pins
storage drive. Do not touch the circuit board
Note: Ensure that the circuit board
the bracket.
2
storage drive bracket
2
bracket
1
on the bracket with the corresponding holes in the new
3
on the storage drive.
3
faces upward and the connectors
2
face toward the rear of
.
Chapter 11
Installing or replacing hardware
133