Lenovo ThinkStation P500 Hardware Maintenance Manual page 161

Machine types: 30a6, 30a7, 30a8, and 30a9
Hide thumbs Also See for ThinkStation P500:
Table of Contents

Advertisement

9. Install the bracket with the new storage drive into the front-access storage enclosure, and then close the
handles on both sides of the bracket.
Note: Ensure that the storage drive connectors are aligned with the corresponding connectors in
the front-access storage enclosure.
Figure 84. Installing the storage drive bracket
10. Pivot the front cover of the front-access storage enclosure until it snaps into position.
Figure 85. Closing the front cover of the front-access storage enclosure
11. Install the front-access storage enclosure into the optical drive bay. See "Installing or replacing a device
in the optical drive bay" on page 114.
12. Connect the signal cable, the power cable, and the front cover control cable to the front-access storage
enclosure.
.
Chapter 11
Installing or replacing hardware
153

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkstation p70030a630a730a830a9

Table of Contents