Lenovo ThinkStation P500 Hardware Maintenance Manual page 129

4. To install the new card reader into the card reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket and then press the new card reader downward until
it snaps into position.
Figure 28. Installing the card reader into the card reader retaining bracket
5. Note the orientation of the new 29-in-1 card reader and route the card reader cable into the cable clip.
Hold the clip on the card reader retaining bracket to insert the new card reader into the card reader
slot in flex module until it snaps into position.
Figure 29. Installing the card reader in the flex module
.
Chapter 11 Installing or replacing hardware
121