Solenoid Tests - Xerox Phaser 6100 Service Manual

Maintenance and Diagnostics

7.6.2.2 Solenoid Tests

This function allows the operation of the various solenoids and clutches to be checked.
<How to operate>
a. Press the Scroll button until
b. Press the OK button to select this function.
c. Press the Scroll button until you see the name of the solenoid or clutch you wish to test.
d. Press the OK button to run the test. The test is stopped by pressing the Back button.
Pressing the Back button when the test is already stopped will return to Step 'C' above.
e.
f.
Pressing the Back button again will return to the EDC main menu.
Menu Item
Operates the yellow developer clutch.
Y Clutch
Operates the magenta developer clutch.
M Clutch
Operates the cyan developer clutch.
C Clutch
Operates the black developer clutch.
K Clutch
Operates the yellow developer solenoid.
Y Solenoid
Operates the magenta developer solenoid.
M Solenoid
Operates the cyan developer solenoid.
C Solenoid
Operates the black developer solenoid.
K Solenoid
Operates the feed clutch.
Feed Clutch
Operates the transfer roller T2 solenoid.
T2 Clutch
(Transfer Roller)
Operates the transfer belt cleaning solenoid.
ITB Clutch
(Transfer Belt)
Operates the duplex solenoid.
Duplex Solenoid
Operates the Tray 1 clutch.
Tray 1 Clutch
Operates the MPT clutch.
MPT Clutch
Operates the Tray 2 clutch, if the optional
Tray 2 Clutch
500-sheet feeder is installed.
(if installed)
7-14
"Solenoid" is displayed.
Description Test Results
On or Off
On or Off
On or Off
On or Off
On or off
On or Off
On or Off
On or Off
On or Off
On or Off
On or Off
On or Off
On or Off
On or Off
On or Off