Controller Specification; Electrical Specification - Xerox Phaser 6100 Service Manual

Specifications

3.2 Controller Specification

Item
Processor
Memory
Emulation
Operating Systems
Interface
Interface switching
Interface time-out
Font
Color Management

3.3 Electrical Specification

Item
Input Voltage
Input Range
Nominal Frequency:
Frequency tolerance
Power Consumption
3-2
SPGPM (Samsung Printer Graphic Processor) Clock speed 120 MHz
The controller has 64 MB SDRAM and 4 MB flash ROM on Board.
1 DIMM expansion slot for SDRAM DIMM Package: DIMM; 100-pin
Type: SDRAM
DIMM Type: Unbuffered (SEC Custom, support other products within SEC)
Error Checking: Non-parity
Speed: 120/133 MHz
Voltage: 3.3 V
Samsung proprietary design 64/128MB
(128 MB Not currently supported)
SPL-Color
Win 95/98/Me/NT/2000/XP, Mac OS 9 USB only, Linux
One parallel port
IEEE 1284 -1994 compliant, (Bi-directional, ECP/Nibble/Byte Mode)
One USB port
USB v.2.0 compliant
Color-coded to meet WHQL requirements, connector must be Pantone 426C
One 10/100 BaseT NIC connector
- The printer supports an internal Network Interface Card (NIC), which can be
installed pre-configured at the factory. This NIC supports all of the major
Network Operating Systems, such as the Novell NetWare, TCP/IP, etc.
Automatic
5 min (max.)
Windows Font
ICC ICM V3.4
Low voltage: 100-127 VAC
90-135 VAC
+/- 47/63 Hz
+3 Hz
Print mode: 450 watts or less
Standby mode: 160 watts
Sleep mode: 35 watts
Description
Description
High voltage: 220-240 VAC
180-264 VAC
+/- 47/63 Hz
+3 Hz