Specifications; General Specifications - Xerox Phaser 6100 Service Manual

3

Specifications

The specifiations in this manual are correct at the time of printing. Product specifications are subject to change
without notice.

3.1 General Specifications

Item
Print Method
Developing system
Exposure System
Fuser (toner fixing)
Resolution
Warm-up time
FPOT
Feed Method
Dimensions
Weight
Acoustic Noise
Power Saver Mode
Non-impact electro-photography
Non-magnetic, Mono-component, Non-contact method
Semiconductor laser diode beam scanning
Thermal rollers fusing with pressure (heat lamp: 800 watts)
True: 600 x 600 dpi
Addressable: 1200 x 1200 dpi
110 and 220 volt units: 120 seconds (2 minutes from power on to ready)
Mono: Less than 15 seconds (Ready to 1st page out)
Color: Less than 24 seconds (Ready to 1st page out)
MPT (Multi-Purpose Tray), Tray 1 (FCT-First CassetteTray),
Tray 2 (SCT-Second Cassette (Tray)
Width: 510 mm (20.07 in)
Depth: 470 mm (18.5 in)
Height: 405 mm (15.94 in)
Printer: 35 kg (77.2 lb) with consumables
Optional Tray 2: 3 kg (6.6 lb) with packaging
Standby: less than 41 dB
Printing: less than 48 dB (color)
Available, user settings enabled
Description
Service Manual 3-1
Specifications