Xerox Phaser 6100 Service Manual page 100

Disassembly
>> On re-assembly:
Note
The roller has 3 pieces; 2 collars and the roller. When re-assembling the roller, the collars fit with the long ends
facing out.
The hole through the roller is round on one end and D shaped on the other. The D shaped end needs to face the
left.
The black plastic bearing that the roller shaft fits into is not attached to the printer and is easily lost. It has a small
key that fits into a slot in the MPT assembly.
Caution
Do not pinch the black washer in the e-ring slot.
6-44