Sensor Tests - Xerox Phaser 6100 Service Manual

7.6.2.3 Sensor Tests

This function allows the operation of the various sensors to be checked.
<How to operate>
a. Press the Scroll button until
b. Press the OK button to select this function.
c. Press the Scroll button until you see the name of the sensor you wish to test.
d. Press the OK button to run the test. The test is stopped by pressing the Back button.
Pressing the Back button when the test is already stopped will return to Step 'C' above.
e.
f.
Pressing the Back button again will return to the EDC main menu.
Menu Item
Displays feed sensor status
Feed Sensor
Displays exit sensor status
Exit Sensor
Displays waste toner cartridge sensor
Waste Box
Sensor
Left or right cover sensor status
Side Cover
Tray 1 paper empty sensor status
Tray 1 Empty
Sensor
MPT sensor status
MPT Sensor
Tray 2 paper empty status, when optional
Tray 2 Empty
500-sheet feeder is installed.
Sensor
Tray 2 cover status, when optional 500-sheet
Tray 2 Cover
feeder is installed.
Sensor
"Sensor Test" is displayed.
Description
Maintenance and Diagnostics
Test Results
With Paper or Without Paper
With Paper or Without Paper
Not installed when full or not installed
Installed, when empty or installed
Cover opened or Cover closed is dispayed.
With Paper or Without Paper
With Paper or Without Paper
With Paper or Without Paper
Cover opened or Cover closed is dispayed
Service Manual 7-15