Fuser (Pl 9.1.9) - Xerox Phaser 6100 Service Manual
Color laser printer
Hide thumbs
Also See for Phaser 6100:
- User manual (206 pages) ,
- Instructions manual (10 pages) ,
- Quick reference manual (8 pages)
Table of Contents
Advertisement
Disassembly
6.3.5a Fuser (PL 9.1.9)
Warning
If the printer has been printing recently, the fuser will be hot. Open the exit cover and let the fuser
cool before removing it.
1.
Open the DEVE cover (Door A).
Note
Before opening the exit cover, completely open the DEVE cover until it is at a 90
frame and the toner cartridges are ejected.
2.
Open the exit cover (Door B).
3.
Remove the 4 thumbscrews.
4.
Remove the fuser by holding both sides and pulling straight up and out of the priner.
6-18
Screw
Screw
o
angle to the main
Screw
Screw
Advertisement
Table of Contents
Troubleshooting
