Z-Wave ZTS-110 User Manual page 9

Step Procedure / Description
Press "Prog" key once to confirm the setting
and it will go to Advanced Recovery setting.
9
Press Up/Down key to enable/disable
Advanced Recovery Mode.
Press "Prog" key once to confirm the setting
10
and it will go to the Home page.
Note: Explanations of Swing and Differential set point
HEAT mode: thermostat controls the temperature according to the following
diagram
Output
Set point
nd
2 Turn on 2 Turn off
st
1 Turn on
Off
Diff Swing Swing
Example for Heating: (Set point = 70 F, Swing = 1 F, Differential = 2 F)
=> 1st stage heater turns on when room temp is 69 F and off at 71 F.
=> 2nd stage heater turns on when room temp is 67 F and off at 70 F.
LCD indication
RECOVERY
RECOVERY
MO WAKE
AM
PROG ON
FAN AUTO
nd
Heat
st
1 Turn off
Temperature
SD= switch differential
o o
o
o
15
COOL Mode: thermostat controls the temperature according to the following
Output
Off
OFF
Example for Cooling: (Set point = 80 F, Swing = 1 F)
=> Cooler turns on when room temp is 81 F and off at 79 F.
AUTO:
Output
Off
There is a dead band 4 F/2 C between heat set point and cool set point.
Example 1: If user select heat set point is 70 F, the minimum cool set point will be
o
o
o
Pervious heat set point is 70 F and cool set point is 74 F
Example 2: If user changes heat set point to 72 F, cool set point will be updated to
diagram
Set point
Turn off Turn on
Swing
o
o
thermostat controls the temperature according to the following
diagram
Heat Set point
nd nd
2 Turn on 2 Turn off
st st
1 Turn on 1 Turn off
Diff Swing Dead band
o o
o
limited at "heat set point" + 4 F: 74 F
o
o
76 F automatically to maintain the dead band.
16
Cool
Temperature
o
o
Cool Set point
Heat
Temperature
Swing
o
o
o
o