Change Mode; Change Fan Mode; Select Program Mode - Z-Wave ZTS-110 User Manual

Change Mode

Note: In Heat mode =>it displays "HEAT" if ELECTH is selected during jumper
setting.
=> it displays "HEAT PUMP" if HPUMP is selected during
jumper setting.
Below example is based on HEAT PUMP
Procedure / Description
Press "Mode" key once to change the operation
mode:
OFF -> HEAT (PUMP) -> COOL -> AUTO -> OFF
LCD indication
MO WAKE
AM
FAN AUTO
MO WAKE
AM
FAN AUTO
MO WAKE
AM
FAN AUTO
MO WAKE
AM
FAN AUTO
17

Change Fan Mode

Step Procedure / Description
Press "Fan" key once to change the Fan
mode:
FAN AUTO -> FAN ON
FAN AUTO:
Electric heat (HE):
1
Fan runs only when Heating/Cooling is
running.
Gas heat (HG):
OFF
Fan runs only when Cooling is running.
Press "Fan" key once to change the Fan
mode:
FAN AUTO -> FAN ON
2
HEAT
FAN ON:
Fan stays on all the time.

Select Program Mode

Step Procedure / Description
COOL
Press "Prog" key once to select PROG
mode:
PROG ON -> OVERRIDE ->
1
PERMANENT OVERRIDE
PROG ON: Run the schedule.
AUTO
Press "Prog" key once to select PROG
mode:
OVERRIDE: Temporary override the current
2
schedule and will go back to "PROG ON"
when next time schedule reach.
Press "Prog" key once to select PROG
mode:
PERMANENT OVERRIDE:
3
Permanent override the schedule until user
change back to "PROG ON".
LCD indication
MO WAKE
AM
FAN AUTO
MO WAKE
AM
FAN ON
LCD indication
MO WAKE
AM
PROG ON
FAN AUTO
MO WAKE
AM
OVERRIDE
FAN AUTO
MO WAKE
AM
PERMANENT
OVERRIDE
FAN AUTO
18
COOL
COOL
COOL
HEAT
HEAT