Activate/Deactivate Easy Mode; Temperature Scale Selection In Easy Mode; Setting Mode - Z-Wave ZTS-110 User Manual

Activate/Deactivate Easy Mode

The ZTS-110 is default with Easy mode, below illustrates the functions of Easy
mode:
- Active functions: Change Mode, change Fan mode and Temperature Scale
selection
- Inactive functions: Scheduling, Program Mode, Clock Display, Setting Time,
Setting Swing, Setting, Differential Set-Point and Advanced
Recovery Mode
User can use Easy mode to disable Schedule function and the schedule will be
controlled by Z-Wave gateway. User can still change temperature and mode by
pressing the local physical buttons.
User can deactivate the Easy mode by local "Setting Mode" or Z-Wave
Configuration Parameter number 8. (Please refer to Z-Wave Configuration
parameters table).
Below is the example by local setting:
Procedure / Description
Press and hold "Mode" key for 2 seconds to
entry the setting mode.
It will display "EASY YES" if it stays in
Easy mode. Otherwise, it will display "EASY no"
if Easy mode is deactivated.
Press Up/Down key to toggle the selection.
Press "Prog" key to confirm your settings.
- it will go back to Home page if selected "YES".
- it will go to Day setting if selected "no".

Temperature Scale selection in Easy Mode

Procedure / Description
Press and hold "Prog" keys for 2 seconds to
entry temperature F (Fahrenheit) -> C (Celsius)
selection mode
Press Up/Down key to toggle the temperature F
(Fahrenheit) -> C (Celsius) selection.
Press "Prog" key to confirm it and back to the
Home page.
LCD indication
LCD indication
11
Note:
If you deactivated the Easy mode, please refer to Setting Mode for the temperature
scale selection.
Setting Mode (Set Day, Clock, 12/24 hour, F/C, Swing and
Differential)
Symbol
Increase value / Toggle selection
Decrease value / Toggle selection
Backward to previous setting
Forward to next setting
Confirm and go to next setting
Confirm and go back to Home

Setting Mode

Key Description
12