Factory Defaults (Reset) - Bunn DUAL SH DBC Operating Manual

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FACTORY DEFAULTS
This function allows the operator to erase all of the
previously entered recipes and ad messages. Factory-
set default values will replace all previous settings.
FACTORY DEFAULTS
NO
EXIT
WILL REPLACE ALL
BREW SETTINGS
ARE YOU SURE?
NO
EXIT
Procedure to set factory defaults:
1. Press and hold upper right hidden switch until SET
NEW RECIPES appears. Release switch. Press and
release upper right hidden switch until the display
reads FACTORY DEFAULTS.
2. Pressing NO in this screen will revert to the MAIN
SCREEN. Press YES to replace the defaults. This
advances to WILL REPLACE ALL BREWING SET-
TINGS. This screen will alternate with ARE YOU
SURE?.
3. Pressing NO in the confi rmation screen will revert
to MAIN SCREEN, without resetting the brewing
setups to the defaults. Press YES to load the de-
faults. This will then revert to the MAIN SCREEN,
and the factory default values will replace all
previously entered values. It will NOT reset the
summation Brew counter.
YES
YES
REPLACE
P2312
Page 40
FACTORY DEFAULT VALUES
BREW LOCKOUT
ENABLE ADS
BREW TEMPERATURE
READY TEMPERATURE
SPRAY (OZ/MINUTE)
BYPASS (OZ/MINUTE)
FUNNEL LOCKOUT
SERVER LOCKOUT
YES
NO
200˚F (93˚C)
195˚F (91˚C)
39.2
24.1
YES
YES
29877.2 121504