Recipe Programming Methods - Bunn DUAL SH DBC Operating Manual

PROGRAMMING THE BREWER (cont.)
RECIPE PROGRAM METHODS
There are three methods of programming the vari-
ous brewing parameters of the Dual
Funnel ® Brewer.
METHOD 1
Using a Smart Funnel
Grinder:
Certain coffee NAMES are stored in the G9-2T DBC
or MHG's memory. When a particular name of coffee
is ground into the Smart Funnel
batch size selected are transferred from the grinder to
the programming chip located in the funnel's handle.
The funnel is then inserted into the brewer's left side
funnel rails. The sensor coil on the brewer reads the
information contained in the handle. This allows the
operator to set the BREW VOLUMES, BYPASS PER-
CENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES and DRIP-OUT TIMES for that particular coffee
NAME. Each coffee NAME can be set individually to
provide optimum brewing quality.
RECIPES
This diagram allows for the creating, modifying,
or viewing of recipes in the brewer.
ARE YOU CREATING OR CHANGING A RECIPE FOR A
COFFEE NAME PREVIOUSLY USED IN THIS BREWER?
DON'T
KNOW
YOU WILL MODIFY AN
EXISTING RECIPE
AND FOLLOW INSTRUCTIONS
TO VIEW A LIST OF EXISTING RECIPES,
AND FOLLOW THE INSTRUCTIONS
®
SH with Smart
®
and a G9-2T DBC or MHG
® , that name and the
YES
HAVE YOU RECEIVED A RECIPE CARD
CONTAINING THE NEW RECIPE?
YES
FOLLOW INSTRUCTIONS
ON THE RECIPE CARD
GO TO REVIEW RECIPES
GO TO REVIEW RECIPES
METHOD 2
Using a RECIPE CARD to enter all of the brew set-
tings at one time:
If using a coffee name not in the G9-2T DBC or
MHG's memory, the customer can obtain a RECIPE
CARD from the factory with all the information needed
to set up that particular coffee fl avor. This includes the
COFFEE NAME, BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES,
and DRIP-OUT TIMES.
METHOD 3
Not using a Smart Funnel
MHG Grinder:
This allows the operator to enter ONE set of brewing
parameters for each side, in the event a Smart Funnel
and/or a G9-2T DBC ot MHG is not used with the Dual
SH Brewer. This is referred to as a NO NAME coffee
fl avor. If the brewer does not read the information in
the funnel's handle, it automatically selects the NO
NAME brewing parameters set up prior to brewing.
This includes the BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES
and DRIP-OUT TIMES for the three batch sizes.
NO
NO
DOES THE GRINDER HAVE THE
NAME IN ITS MEMORY?
NO
DON'T KNOW
GO TO SET NEW RECIPE,
YOU WILL ENTER
THE NO NAME LEFT
AND NO NAME
RIGHT BREW
SETTINGS
OR
Page 11
®
and/or a G9-2T DBC or
YES
AND FOLLOW THE
INSTRUCTIONS
REFER TO NAME LIST
IN GRINDER MANUAL
CONTACT BUNN-O-MATIC
FOR ASSISTANCE
P2369
®
®
OR
29877.2 121504