Alpine IVA-D106 Owner's Manual page 86

CD
System Switch
When connecting an equalizer or divider using Ai-NET
feature. place the two switches in the EO/DIV position.
When no device is connected. leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EO/DIV
position.
(If the front panel is viewed from the front.)
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the
switch position.
@
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
@
RGB Cable (Included with NVE-N852A1NVE-N872A,
not included with NVE-N871 A)
@
Digital Output Terminal
@ Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
@
Fiber optic Cable (Sold Separately)
®
Audio Input Connector (AUXICAMERA IN) (Yellow)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
@
RCA Extension Cable (Included with DVD video
player)
®
Ai-NET Cable (Included with DVD video player)
@
Ai-NET Cable (Included with CD Changer)
®
To Ai-NET Connector (Gray)
@
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
@ To Ai-NET Connector (Black)
@
Ai-NET Cable (InclUded with Audio Processor)
Connecting Video compatible iPod and Back-up Camera at the same time
CD
~
NORM
li."~JII
EOJDIV
S'"r1~\~~i
. . .
;;~l
.
To Video Output terminal
@
.1 .
®
.!
Back-up camera
'-+----....;;;;".(y-e-n-o-w-)<crtlJiI--
~ i
(Sold separately)
l~:
Vi. . .
comp"b~
(~I
iPod (Sold separately)
t
.1
set "setting the AUX Mode" (page 39) to "CAMERA:'
.2
Set "Setting for iPod Connection" (page 38) to "VIDEO:'
CD
System Switch
When connecting an equalizer or divider using Ai-NET
feature. place the two switches in the EO/DIV position.
When no device is connected. leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EO/DIV
position.
(If the front panel is viewed from the front.)
• Do not make the two switches to different settings.
• Be sure to turn the power offto the unit before changing the
switch position.
@ iPod Direct Connector
@
Audio Input Connector (AUXICAMERA IN)
@
iPod (V)lCAMERA Connector
@
Video Connector
@ RCA Extension Cable (Sold Separately)
®
iPod Video FULL SPEEDTM Connection Cable
(InclUded)
85-EN