Graphic Equalizer Adjustments; Parametric Equalizer Adjustments; Equalizer Presets (Factory's Eq) - Alpine IVA-D106 Owner's Manual

Graphic Equalizer Adjustments
The 7 Band graphic equalizer is adjustable.
setting item:
G-EQ
1
Select L+R by touching
[~]
of G-EQ.
L+R:
Sets the same adjustment values for the left and
right channels.
When parametric EQ is adjusted, this setting will be turned
OFF.
2
Touch [»] of G-EQ.
The G-EQ list screen appears.
3
Adjust the G-EQ to your preference.
Selecting the Band
setting contents: BAND 1 to 7
Touch
[~l
or
[~l
of BAND.
Select the desired band.
Adjusting the Level
setting contents: -6 dB to +6 dB
Touch
[~l
or
[~
1
of the desired frequency to adjust the
level.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer's center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
Setting item: P-EQ
1
Select L+R by touching
[~]
of P-EQ.
L+R:
Sets the same adjustment values for the left and
right channels.
When graphic EQ is adjusted, this setting will be turned
OFF.
2
Touch [»] of P-EQ.
The P-EQ list screen appears.
3
Adjust the P-EQ to your preference.
46-EN
Selecting the Band
Setting contents: BAND 1 to 5
Touch
[~l or [~l
of BAND.
Select the desired band.
Adjusting the Frequency
Setting contents: BAND 1: 20 Hz-80 Hz
BAND 2: 50 Hz-200 Hz
BAND 3: 125 Hz-3.2 kHz
BAND 4: 315 Hz-8 kHz
BAND 5: 800 Hz-20 kHz
Touch
[~l
or
[~l
of FREQ., then adjust the frequency of
the selected band.
Adjusting the Level
Setting contents: -6 dB to +6 dB
Touch
[~l or [~
1
of LEVEL, then adjust the level of the
selected band.
Setting the Bandwidth
Setting contents: 1/1.513
Touch
[~l or [~l
of Q.
Select the bandwidth.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
• The frequencies of adjacent bands cannot be adjusted within 4 steps.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
Equalizer Presets (Factory's EO)
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting contents: F-EQ
1
Touch [»] of F-EQ.
The F-EQ list screen appears.
2
Set to ON by touching
[~]
or
[~
] of the desired
equalizer characteristic.
FLAT / POPS / ROCK / NEWS / JAZZ & BLUES / ELECTRICAL
DANCE / HIP HOP & RAP / EASY LISTENING / COUNTRY /
CLASSICAL / USER 1-6
• By selecting USER I to 6. you can recall the stored preset number in
"Graphic Equalizer Adjustments" or "Parametric Equalizer
Adjustment ".