Switching Background Textures; Setting Automatic Background Textures; Visual Eq!M; Visual Eq Setting Operation - Alpine IVA-D106 Owner's Manual

You have a choice of background textures you can set.
setting item: BACKGROUND
setting content: MODEl / MODE2
• This operation can be carried out after removing the disc from the
unit or when playback ofthe disc has stopped.
• Wallpapers downloaded from "Downloading the BACKGROUND
data" (page 43) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected
10
the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR. etc.), background
textures selected by this setting cannot be displayed on the unit.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
ON: Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1 H MODE2
OFF: Turn off the Auto Background Texture Scroll mode.
• Wallpapers downloaded from "Downloading the BACKGROUND
data" (page 43) are recalled.
You can choose from 5 different colors for the font background.
setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Visual EO Setting Operation
The following steps 1 to 4 are common operations to each
"Setting item" of VISUAL EQ setting. Refer to each section for
details
1
After steps 1 and 2 in "Display Setup Operation"
(page 40) have been performed, touch [»] of
VISUAL EQ.
VISUAL EO screen appears.
2
Select a desired setting item by touching [ ... ] or [ ... ].
Setting items:
VISUAL EO* H BRIGHT H TINT* H CONTRAST H
SHARP* H COLOR* HUSER MEMORY*
*
The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [-.] or [~].
4
Touch [RETURN] to return to the previous screen.
sel~ctir{
.e!t!P9
You can select a mode suitable for the subject image.
Setting item: VISUAL EO
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
• To return
10
the initial setting after selecting anyone ofthe setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brighllless. picture tint, etc., set this function to OFF.
• lfyour desired brightness. picture tint. etc.. are adjusted after
selecting anyone ofthe setting contents (NIGHT M. to CONTRAST).
"CUSTOM" is displayed.
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content:
,~,
/ RESET
1 Touch
[»
I
of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accuralely touch the
+
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
+
mark provided in the upper right
corner of the screen.
This completes adjustment. and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
,~,
mark. touch
[RESET]
10
reSlOre the adjustment screen
10
the initial setting.
• If you touch [RETURN] on the adjustment screen, no adjustment is
done and the DISPLAY selllp screen is restored.
OFF (FLAT):
NIGHTM.:
SOFT:
SHARP:
CONTRAST:
P-1:
P-2:
Initial Setting
Suitable for movies in which dark scenes
frequently appear
Suitable for CGs and animated films.
Suitable for old movies where images are not
clearly shown.
Suitable for recent movies.
Recalls the VISUAL EO mode being stored on
preset NO.P-1 from "Storing VISUAL EO"
(page 42).
Recalls the VISUAL EO mode being saved on
preset NO.P-2 from "Storing VISUAL EO"
(page 42).
41-EN