Setting The Image Review Time; Reverting The Camera To The Default Settings - Canon EOS 7D Mark II (G) Instruction Manual

Before You Start

3 Setting the Image Review Time

You can set how long the image is displayed on the LCD monitor just
after shooting. To keep the image displayed, set [Hold]. To not have the
image displayed, set [Off].
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
3 Reverting the Camera to the Default SettingsN
The camera's shooting function settings and menu settings can be
reverted to their defaults.
70
Select [Image review].
1
Under the [z1] tab, select [Image
review], then press <0>.
Set the desired time.
2
Select the desired setting, then press
<0>.
Select [Clear all camera settings].
1
Under the [54] tab, select [Clear all
camera settings], then press <0>.
Select [OK].
2
Clearing all the camera settings will
reset the camera to the default
settings on pages 71-73.