Logging The Route Traveled - Canon EOS 7D Mark II (G) Instruction Manual

Logging the Route Traveled

Map data ©2014 ZENRIN -
When the GPS logging function is enabled, the [
the shooting function settings screen (p.201).
When you set the power switch to <2> or when auto power off takes
effect, <
210
Select [Set up].
1
Select [GPS Logger].
2
Set [Log GPS position] to
3
[Enable].
> will be displayed on the LCD panel.
When using the GPS logging function,
the geotag information of the route the
camera traveled is automatically
recorded in the camera's internal
memory.
Shooting locations and the route
traveled can be viewed on a map
displayed on a computer using the Map
Utility (EOS software, p.538).
Note that the GPS logging function will
continue to log information even when
the camera's power is off, including
auto power off.
Check that [GPS] is set to [Enable].
Select [Set up], then press <0>.
Select [Log GPS position], then
press <0>.
Select [Enable], then press <0>.
] icon will appear on