Canon EOS 7D Mark II (G) Instruction Manual page 265

Digital slr camera

Hide thumbs Also See for EOS 7D Mark II (G):

Table of Contents

Built-in Flash Settings

To prevent the flash from damage due to overheating, do not use MULTI

flash more than ten consecutive times. If you use MULTI flash 10 times,

allow the flash to rest for at least 10 min. before firing the flash again.

Flash will be output at 1/128 - 1/4 for MULTI flash.

Normally, set this to [E-TTL II]. This

enables autoexposure shooting with the

built-in flash.

To set the flash output level manually,

select [Manual flash].

Select [2flash output], then set the

flash output level to within 1/1 - 1/128

(1/3-stop increments) before shooting.

This mode is for advanced users.

With [MULTI flash] selected, you can

use a slow shutter speed to capture

multiple moments of a moving subject in

First set the [2flash output],

[Frequency], and [Flash count], then

shoot. This mode is for advanced users.

3 Setting the FlashN