Setting The Image Review Time; Reverting The Camera To The Default Settings - Canon EOS 5D MARK IV Instruction Manual

3 Setting the Image Review Time

You can set how long the image is displayed on the LCD monitor
immediately after shooting. To keep the captured image displayed, set
[Hold]. To not have the captured image displayed, set [Off].
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
3 Reverting the Camera to the Default SettingsN
The camera's shooting function settings and menu settings can be
reverted to their defaults.
For how to clear all the Custom Function settings, see page 481.
Select [Image review].
1
Under the [z1] tab, select [Image
review], then press <0>.
Set the desired time.
2
Select the desired setting, then press
<0>.
Select [Clear all camera settings].
1
Under the [55] tab, select [Clear all
camera settings], then press <0>.
Select [OK].
2
Clearing all the camera settings will
reset the camera to the default
settings on pages 78-80.
Before You Start
77