Fully Automatic Shooting with One External Speedlite
This shows the most basic setup for
fully-automatic wireless flash shooting
with one external Speedlite.
Steps 1 to 4 and 6 apply to all wireless
flash shooting. Therefore, these steps
are omitted in other wireless flash
setups explained on the pages
hereafter.
On the menu screens, the <0/1>
icons refer to the external Speedlite, and
the <3/2> icons refer to the built-in
flash.
Press the <I> button to raise the
1
built-in flash.
For wireless flash shooting, be sure
to raise the built-in flash.
Select [Flash control].
2
Under the [z1] tab, select [Flash
control].
Select [Built-in flash settings].
3
Using Wireless FlashN
275