Manual Sensor Cleaning - Canon EOS 7D Mark II (G) Instruction Manual

Manual Sensor CleaningN
3
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a commercially-available blower, etc. Before
cleaning the sensor, detach the lens from the camera.
The image sensor is extremely delicate. If the sensor needs to be
cleaned directly, having it done by a Canon Service Center is
recommended.
If you use a battery, make sure it is fully charged.
If you use Battery Grip BG-E16 (sold separately) with size AA/LR6
batteries, manual sensor cleaning will not be possible.
For the power source, using AC Adapter Kit ACK-E6 (sold separately) is
recommended.
Select [Sensor cleaning].
1
Under the [53] tab, select [Sensor
cleaning], then press <0>.
Select [Clean manually].
2
Select [OK].
3
In a moment, the reflex mirror will lock
up and the shutter will open.
"CLn" will blink on the LCD panel.
Clean the sensor.
4
End the cleaning.
5
Set the power switch to <2>.
409