Canon EOS 7D Mark II (G) Instruction Manual page 453

: Selected AF pointzCenter/Registered AF point
During metering, tilting <p> to the right will switch between the current
AF point and the center AF point or registered AF point.
*4:On the setting screen, when you press the <B> button, you can select [Switch to
center AF point] or [Switch to registered AF point]. To register the AF point, see
page 450.
: Direct AF point selection
During metering, you can select an AF point directly with the <9> dial
or <5> without pressing the <S> button. With the <5> dial, you can
select a left or right AF point. (Looping sequence for Zone AF and Large
Zone AF.)
*5:On the Multi-controller setting screen, when you press the <B> button, you can
press the center of <9> to select [Switch to center AF point] or [Switch to
registered AF point]. To register the AF point, see page 450.
: Direct AF point selection: Vertical
During metering, you can turn the <5> dial to directly select an upper
or lower AF point without pressing the <S> button. (Looping sequence
for Zone AF and Large Zone AF.)
: Direct AF area selection
During metering, you can use <p> to directly select an AF area
selection mode without pressing the <S> button.
If [Direct AF point selection] is assigned to <9>, you cannot use <9> to
scroll up/down the shooting information display (p.354, 357) during the
image review just after shooting.
83: Custom ControlsN
453