Cadillac 2015 SRX Owner's Manual page 58

handle and open the driver door.
The RKE transmitter must be
present for the recall to activate.
If the driver door is already
open, press on the RKE
transmitter to activate the recall.
To activate the recall when On - At
Ignition On is selected in the vehicle
personalisation menu:
Place the ignition in ON/RUN/
START.
See Vehicle Personalisation on
page 5-39.
To stop recall movement, press one
of the memory, power mirror or
power seat controls; or press the
adjustable pedal switch (if
equipped). If On - At Ignition On is
selected in the vehicle
personalisation menu, placing the
ignition in OFF also stops the recall.
Easy Exit Recall
If programmed on in the vehicle
personalisation menu, this feature
moves the seat approximately 7 cm
(3 in) rearward automatically
allowing the driver more room to exit
the vehicle.
Easy Exit recall activates when one
of the following occurs:
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.
See Vehicle Personalisation on
page 5-39.
To stop recall movement, press one
of the memory, power mirror, power
seat controls or the adjustable pedal
switch (if equipped).
Seats and Restraints
Obstructions
If something has blocked the driver
seat and adjustable pedals (if
equipped) while recalling a memory
position, the recall may stop.
Remove the obstruction. Then do
one of the following:
If manually recalling the position,
press and hold the appropriate
manual control for the memory
item that is not recalling for
two seconds. Try recalling again
by pressing the appropriate
memory button.
If automatically recalling the
position, press and hold the
appropriate manual control for
the memory item that is not
recalling for two seconds. Try
recalling again by opening the
driver door and pressing
the RKE transmitter.
If recalling the exit position,
press and hold the power seat
control rearward for
two seconds. Then try recalling
the exit position again.
3-7
on