Air Vents - Cadillac 2015 SRX Owner's Manual

Hide thumbs Also See for 2015 SRX:
Table of Contents

Advertisement

SYNC: Press the SYNC button on
the touch screen to match the rear
climate control temperature to the
front climate control driver
temperature. The SYNC button will
be lit. Press the TEMP, MODE,
or AUTO button twice to unlink the
set driver and rear temperatures.
The SYNC button turns off.
Rear Control Lockout: Press to
lock or unlock control of the rear
climate control system from the rear
seat passengers. When locked the
rear climate control can only be
adjusted from the front seat.
Automatic Operation
Rear AUTO: Press to turn on or off.
The air delivery and fan speed are
controlled automatically. The AUTO
indicator appears on the display.
If any of the climate control settings
are manually adjusted, this cancels
full automatic operation.
Manual Operation
A
(Fan Control): Press
briefly or press and hold the rear
climate control buttons or touch
screen to increase or decrease the
A
airflow. Pressing
when the
system is off will turn the system on.
The air delivery mode remains in its
previous setting.
+/- (Temperature Control): Press
briefly or press and hold the rear
temperature control buttons or touch
screen to adjust the rear passenger
temperature. Press + for warmer air
and press - for cooler air.
/
/
(Air Delivery Mode
Control): Press the desired mode
button on the touch screen or the
MODE button on the rear faceplate
to change the direction of the airflow
in the rear seating area.
or
(Heated Rear Seats, If
Equipped): Press
or
the left or right outboard seat
cushion and seatback. See Heated
Rear Seats on page 3-10.
Climate Controls

Air Vents

Move the sliding knob on the air
outlets up and down or left and right
to direct the airflow. Use the
thumbwheels near the air outlets to
open or close off the airflow.
Operation Tips
Clear away any ice, snow,
or leaves from air inlets at the
base of the windscreen that
could block the flow of air into
the vehicle.
Keep the path under the front
seats clear of objects to help
circulate the air inside the
vehicle more effectively.
Use of non-GM approved bonnet
air flow deflectors can adversely
affect the performance of the
system. Check with your dealer
before adding equipment to the
outside of the vehicle.
to heat
Do not insert any objects in the
outlets, as failure of the
mechanism may occur.
8-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents