Cadillac 2015 SRX Owner's Manual page 305

10-60 Vehicle Care
4. Remove the valve stem cap from
the flat tyre by turning it
anticlockwise.
5. Attach the sealant/air hose (6)
onto the tyre valve stem. Turn it
clockwise until it is tight.
6. Plug the power plug (8) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See Power Outlets on page 5-6.
If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.
If the vehicle only has a cigarette
lighter, use the cigarette lighter.
Do not pinch the power plug
cord in the door or window.
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
8. Press and turn the selector
switch (1) anticlockwise to the
Sealant + Air position.
9. Press the on/off (2) button to
turn the tyre sealant and
compressor kit on.
The compressor will inject
sealant and air into the tyre.
The pressure gauge (3) will
initially show a high pressure
while the compressor pushes the
sealant into the tyre. Once the
sealant is completely dispersed
into the tyre, the pressure will
quickly drop and start to rise
again as the tyre inflates with
air only.
10. Inflate the tyre to the
recommended inflation
pressure using the pressure
gauge (3). The recommended
inflation pressure can be found
on the Tyre and Loading
Information label. See Tyre
Pressure on page 10-43.
The pressure gauge (3) may
read higher than the actual tyre
pressure while the compressor
is on. Turn the compressor off
to get an accurate pressure
reading. The compressor may
be turned on/off until the
correct pressure is reached.
Caution
If the recommended pressure
cannot be reached after
approximately 25 minutes, the
vehicle should not be driven
farther. The tyre is too severely
damaged and the tyre sealant
and compressor kit cannot inflate
the tyre. Remove the power plug
from the accessory power outlet
and unscrew the inflating hose
from the tyre valve.