Cadillac 2015 SRX Owner's Manual page 304

There is only enough sealant to seal
one tyre. After usage, the sealant
canister and sealant/air hose
assembly must be replaced. See
Removal and Installation of the
Sealant Canister following.
Using the Tyre Sealant and
Compressor Kit to Temporarily
Seal and Inflate a
Punctured Tyre
Follow the directions closely for
correct sealant usage.
When using the tyre sealant and
compressor kit during cold
temperatures, warm the kit in a
Vehicle Care
heated environment for five minutes.
This will help to inflate the tyre
faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard
Warning Flashers on page 6-7.
See If a Tyre Goes Flat on
page 10-55 for other important
safety warnings.
Do not remove any objects that
have penetrated the tyre.
1. Remove the tyre sealant and
compressor kit from its storage
location. See Storing the Tyre
Sealant and Compressor Kit on
page 10-64.
2. Unwrap the sealant/air hose (6)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground
so the hose will reach it.
10-59