Cadillac 2015 SRX Owner's Manual page 307

10-62 Vehicle Care
22. Replace with a new canister
assembly available from your
dealer.
23. After temporarily sealing the
tyre using the tyre sealant and
compressor kit, take the
vehicle to an authorised dealer
within 161 km (100 mi) of
driving to have the tyre
repaired or replaced.
Using the Tyre Sealant and
Compressor Kit without
Sealant to Inflate a Tyre (Not
Punctured)
To use the air compressor to inflate
a tyre with air only and not sealant:
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard
Warning Flashers on page 6-7.
See If a Tyre Goes Flat on
page 10-55 for other important
safety warnings.
1. Remove the tyre sealant and
compressor kit from its storage
location. See Storing the Tyre
Sealant and Compressor Kit on
page 10-64.
2. Unwrap the air only hose (7) and
the power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground
so the hose will reach it.
4. Remove the tyre valve stem cap
from the flat tyre by turning it
anticlockwise.
5. Attach the air only hose (7) onto
the tyre valve stem by turning it
clockwise until it is tight.