6-3. ADJUSTMENT AND CHECKING METHOD
6-3-1. REEL TABLE HEIGHT ADJUSTMENT
1. Preparation before adjustment
FL block: Remove.
Position : LOADING / S cassette
Jig used : Cassette standard plate (J-7), Reel standard plate (J-8) and screwdriver (+)
2. Adjusting
Screw driver (+)
The reel
table rises.
Cssette standard plate (J-7)
Cassette standard plate (J-7)
The reel
table falls.
NG
Reel standard plate (J-8)
(Switch them alternately to use)
Reel standard plate (J-8)
S reel table
T reel table
5-44
OK