T Reel Plate Assembly - Sony DSR-20MD Service Manual

5-16. T REEL PLATE ASSEMBLY

1. Removing
1. Set the L cassette position. (Refer to page 5-2)
2. T band adjustor.
3 Avoid
3. Set the LOADING position. (Refer to page 5-3)
4. T ratchet.
T ratchet
2
3 PH-R T ratchet
T band adjustor
1 Claw
2
TG7 arm assembly
T tension regulator band
assembly
Hook the spring onto
the part.
1
T ratchet spring
5. Plate spring.
Note: Pay attention to the direction of plate spring.
6. T reel plate assembly.
T reel table block assembly
part: Apply the grease (0.5 mm dia.)
2. Attaching
1. Attach the parts in the order of 1 → 6 → 5 → 3 → 4 →
2.
2. Adjust them according to the flowchart (START-1) on page
5-43.
5-24
PH-P , PH-R : Page 5-10
PH-P T reel plate assembly
Plate spring
Pay attention to
the direction.
Claw
T reel holder
Apply the grease
(0.5 mm dia.)
T reel plate assembly