Pinch Arm Assembly, Pinch Limiter And Tension Coil Spring (Pinch); Hc Arm, Hc Roller Assembly; Tg5/6 Catcher Block Assembly - Sony DSR-20MD Service Manual

5-5. PINCH ARM ASSEMBLY, PINCH LIMITER
AND TENSION COIL SPRING (PINCH)
1. Removing
1. Set the UNLOADING position. (Refer to page 5-3)
2. Pinch arm block assembly.
Claw
Note: After check the phase adjustment PH-G , attach the pinch
arm block assembly.
3. Pinch arm assembly and pinch limiter.
Tension coil spring (Pinch)
Pinch limiter
2. Attaching
1. Attach the parts in the order of 1 → 3 → 2.
2. Adjust them according to the flowchart (START-3) on page
5-43.
5-6. HC ARM, HC ROLLER ASSEMBLY, PINCH
RETAINER, PINCH CAM GEAR AND TG5/6
CATCHER BLOCK ASSEMBLY
1. Removing
1. Set the UNLOADING position. (Refer to page 5-3)
2. Pinch arm block assembly. (Refer to 5-5)
PH-G Pinch arm
block assembly
Pinch arm assembly
5-16
3. Flexible board.
Flexible board
CN201 (MD-65 board)
4. HC arm, HC roller assembly and pinch retainer.
HC arm
Claw
Pinch retainer
Fixing torque: 0.0686 N•m (0.7 kg•cm)
5. Pinch cam gear and TG5/6 catcher block assembly.
Screw (M1.4 × 2.5)
PH-G Pinch cam gear

TG5/6 catcher block assembly

Fixing torque: 0.0686 N•m (0.7 kg•cm)
2. Attaching
1. Attach the parts in the order of 1 → 5 → 4 → 3 → 2.
2. Adjust them according to the flowchart (START-3) on page
5-43.
PH-G : Page 5-7
Screw (M1.4 × 2.5)
Never turn this screw
as it has been adjusted.