Tension Coil Spring (Tg2), Spring Adjustor; Tension Coil Spring (Tg7), Spring Adjustor And Tg7 Spring Hook - Sony DSR-20MD Service Manual

5-9. TENSION COIL SPRING (TG2), SPRING
ADJUSTOR, TG2 SPRING HOOK, TG2
SELECTION ARM AND DAMPER SHEET
1. Removing
1. Set the UNLOADING position. (Refer to page 5-3)
2. Tension coil spring (TG2) and spring adjustor.
Damper sheet
Spring adjustor
Claw
TG2 spring hook
Bow
The bow of the spring
should be faced inwards.
3. LM motor block assembly.
• Removing: 1 → 2 → 3 → 4
• Attaching : 4 → 3 → 2 → 1
1 Flexible board
2 Connector 2P
Fixing torque: 0.1961 N•m (2.0 kg•cm)
4. TG2 spring hook and TG2 selection arm.
TG2 spring hook
Claw
Pay attention to the direction.
NG OK NG
Tension coil spring (TG2)
3 Two screws
(TTP2 × 4.5)
4 LM motor block
assembly
Claw
PH-T TG2 selection arm
2. Attaching
1. Attach the parts in the order of 1 → 4 → 2 → 3.
2. Adjust them according to the flowchart (START-2) on page
5-43.
5-10. TENSION COIL SPRING (TG7), SPRING
ADJUSTOR AND TG7 SPRING HOOK
1. Removing
1. Set the UNLOADING position. (Refer to page 5-3)
2. Tension coil spring (TG7) and spring adjustor.
Tension coil spring (TG7)
Bow
The bow of the
spring should be
faced inwards.
3. TG7 spring hook.
Claw
TG7 spring hook
2. Attaching
1. Attach the parts in the order of 1 → 3 → 2.
2. Adjust them according to the flowchart (START-2) on page
5-43.
5-18
PH-T : Page 5-11
Spring adjustor
Claw
TG7 spring hook