Recording; Other Functions - Sherwood RX-4209 Operating Instructions Manual

RECORDING

• The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
• When you select tuner, CD or PHONO as a recording source, recording may be made on AUX 1 or AUX 2, or
both simultaneously.
Recording with AUX 1
1.
Select the desired input as a recording source
except for AUX 1.
2.
Start recording on the AUX 1.
3.
Start play on the desired input.

OTHER FUNCTIONS

Operating the sleep timer
• The sleep timer allows the system to continue to
operate for a specified
period of time before
automatically shutting
off.
• To set the receiver
to automatically turn
off after the specified
period of time.
• Each time this button is pressed, the sleep time
changes as follows:
Unit : minutes
• While operating the sleep timer, " " lights up.
• When the sleep time is selected, the fluorescent
display is dimly lit.
Setting the Auto Power Control
• Press and hold the
SLEEP button for more
than 3 seconds to set
the time for the main
unit to be automatically
turned off when any
other operation is not
inputted.
Recording with AUX 2
1.
Select the desired input as a recording source
except for AUX 2.
2.
Start recording on the AUX 2.
3.
Start play on the desired input.
• Each time this button is pressed, the auto power
control time changes as follows:
OFF 2H
• The default setting value is 6H.
Adjusting the brightness of the fluorescent
display
• Each time this button is pressed, the brightness
of the fluorescent display changes as follows:
ON dimmer
• In the display OFF mode, pressing any button
will restore the display ON mode.
15
4H 6H
OFF