Sherwood RX-4209 Operating Instructions Manual page 5

3.
CONNECTING AUDIO COMPONENTS
• The AUX1 and AUX2 jacks may also be connected to an additional component such as MD recorder, tape
deck, etc.
L
R
CD player
Tape deck
4.
CONNECTING SPEAKERS
Speaker A
Right
SPEAKERS
R L
A
B
Right
Speaker B
5.
AC INPUT CORD
• Plug the cord into a wall AC outlet.
PLAY(LINE) OUT
REC(LINE) IN
• Usually SPEAKER A terminals are used for only a pair of
speakers. When you have another pair of speakers, SPEAKER B
terminals can be used.
• Never short-circuit the + and - speaker cords.
• Be sure to connect speakers firmly and correctly according to the
Left
channel (left and right) and the polarity (+ and -).
▄ Note
• For safe amplifier operation, use the speakers with impedance of
over 8Ω when you use only SPEAKER A or B terminals and use
the speakers with impedance of over 16Ω when you use both
SPEAKER A and B terminals.
Left
5
L
R
MD recorder, etc.
REC IN
PLAY OUT