Swann Max-IP-Cam Manual page 28

D. Using the MAX-IP-Cam EZ IPCam with DDNS Viewer.
Step 1:
Open Cam_EZ Search, and click
"Update". Wait for about 60 seconds
(actual time dependant on the quality
of your connection). The MAX-IP-Cam
should be detected automatically. Click
on the MAX-IP-Cam to view its IP and
Gateway settings. If the system detects
a Dynamic IP address, SubMask or
gateway that cannot be changed, it
means the MAX-IP-Cam on the local
network has been successfully
connected via a PPPoE connection, as
shown below:
At this time, double click the Max-IP-
Cam that has been detected. Your
browser should automatically open to
the login window.
Step 2: You may also view the
surveillance video from the MAX-IP-
Cam via a browser from a remote
connection (such as your office), by
entering a preset DDNS address (such
as maxipcam.dvrdns.org).
Step 5:
Select "automatically retrieve IP
Address [O]" and "Automatically
retrieve DNS server address [B]".
Click "OK".
3.
26
1.
2.