Swann Max-IP-Cam Manual page 19

5.5.2 FTP Server
This menu allows you to enter the FTP (File Transfer Protocol) Server settings. You must also make
sure that the FTP Image settings from 5.3 EventTrigger are enabled to send a file to the
designated FTP server via FTP upon event trigger. This system supports Port Mode and Passive
Mode. You must be able to write to the root folder of the ftp site to use this feature.
How to use FTP Server settings:
Step 1: Enter the IP or HTTP address of the FTP server in "IP/Host";
Step 2: Enter the designated FTP port number in "Port";
Step 3: Enter the account ID of the FTP server in "Account ID";
Step 4: Enter the FTP server password in "Password";
Step 5. Select whether you wish to use "Port Mode" or "Passive Mode" transfer protocol;
Step 6. Click on Submit when you are finished.
5.5.3 DDNS Server
This menu allows you to enter your DDNS (Dynamic Domain Name Server) Settings. You can also
use a PPPoE (with dynamic IP) to connect to the http address of the IPCam (such as
sqipcam.dyndns.org) by entering the registered HTTP address of the DDNS Server. This is
convenient for viewing IPCamS with non-fixed IP addresses.
Entering the DDNS Server Settings:
Step 1: Find a DDNS service (such as http://www.dyndns.org ) and register a user account
password and HTTP user address.
Step 2: Enter the address (IP or HTTP) of the DDNS server. Enter the host name, account ID and
password in each appropriate field;
Step 3: Enter the account ID of the DDNS server in "Account ID";
Step 4: Enter the DDNS server password in "Password";
Step 5. Select the DDNS server connection status automatic display setting;
Step 6. Click on Submit when you are finished.
5.5.4 NTP Server
NTP (Network Time Protocol) allows you to calibrate the IP Cam timing.
Using the NTP Server settings:
Step 1: Enter the NTP Server IP or HTTP address in "IP/Host";
Step 2: Select the correct time zone in the "Time Zone" menu;
Step 3: Click on Submit when finished.
17