Take A Shot - Swann Max-IP-Cam Manual

Step 5.
When the installation is
complete, you may begin
viewing the surveillance
image for the first time, as
shown below.
*Note:
This action loads ActiveX components from the MAX-IP-Cam System to the local machine. To ensure your
machine cannot run malicious ActiveX content from the Internet without authorization, you will be prompted
to allow the ActiveX component of your browser to interact with the MAX-IP-Cam each time you access it.
When you view the stream from the MAX-IP-Cam and you see the prompts regarding downloading, running or
enabling ActiveX content from the IP address of the MAX-IP-Cam, click "Yes" to allow your computer to display
the video from your camera. If you are prompted to allow ActiveX content when you are not connected to your
MAX-IP-Cam, ensure the provider of the content is a reliable and secure source for running programs on your
PC. If you are in doubt about the source of the ActiveX program you are being requested to allow to run on
your system, click "No" to ensure you don't allow malicious programs to interfere with your PC.

3.3 TAKE A SHOT

This function allows users to capture the screenshot as a photo, and save it on the computer.
Directions:
Step 1.
Go to the LiveView menu,
and go to the live image;
Step 2:
Hold down the Ctrl key on
your keyboard;
Step 3.
Place the cursor on the
surveillance image and left
click with your mouse. The
captured image should flash
momentarily, as shown
below:
(or press the "Snapshot" button)
Step 4.
Release the Ctrl key, and the
single still shot image will
have been successfully
captured;
Step 5. Select the CaptureView menu to browse through the captured images.
Refer to Chapter 5.2 for details.
9