For Network Users; Restore The Network Settings To Factory Default; Entering Text For Wireless Settings - Brother DCP-J315W Quick Setup Manual

For Network Users

Restore the network settings to factory default

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating.
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Network Reset.
Press OK.
e
Press to choose Yes.
f
Press to choose Yes.
g
The machine will restart, and the reset is complete.

Entering Text for Wireless Settings

Press a, b, d or c to select a letter, and press OK. Select
case or special characters.
Inserting spaces
To enter a space, choose special characters. Then press a, b, d or c to select
Making corrections
If you entered an incorrect letter and want to change it, press a, b, d or c to select
times to move the cursor under the incorrect character. Then press a, b, d or c to select
Re-enter the correct letter.
and press OK to cycle between upper case, lower
, and press OK.
or . Press OK several
, and press OK.
19