For Wireless Network Users; Before You Begin - Brother MFC-T800W Quick Start Manual

For Wireless Network Users

For wireless network interface users
16

Before you begin

NOTE
If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
On your machine, press Menú (Menu).
Press 5 to choose 5.Network.
Press 0 to choose 0.Network Reset.
Press 1 twice to accept the change.
NOTE
To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access
point/router), see instructions in the Software and Network User's Guide.
To download the Software and Network User's Guide, visit at http://solutions.brother.com/manuals and go to
your model's Manual page.
17
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother machine on a wireless network. If
you began the wireless setup from step 7 on page 7, go to method b or c. For all other users, choose the method
you prefer for your environment.
Method a is the recommended way to connect (Windows
a
Setup using the CD-ROM (Windows
• We recommend using a computer wirelessly connected to your network for this method.
• A USB cable might be needed in some cases.
Now go to
®
or Macintosh).
®
and Macintosh)
page 19
17